Slurry Pipe System

  • Slurry Pipe System
  • Slurry Pipe System
  • Slurry Pipe System
  • Slurry Pipe System
  • Slurry Pipe System
KingMods Logo
Published by KingMods
Claim this mod
V1.0.2.0
46 618

Realistic physical slurry pipe system for Farming Simulator 2025.

Replaces vanilla "drive into a trigger and fill" mechanics with a tactile system where you physically connect tanker fill arms or pipe chains, run a PTO-driven pump, build pressure, control flow direction, and watch slurry move through real plumbing — with a slurry that actually thickens, crusts and blocks if you neglect it.

What it does
Plumbing & transfer

Fill arms swung out of the tanker by joystick into open slurry pits or rubber boot ports on buildings and other vehicles.
Pipe chains — multi-segment pipes laid by walking from one coupler toward another, locked into place when both ends overlap valid couplings.
Direct bez pipes — a single connecting pipe between two nearby couplers, for quick pump transfers between a tanker and a building.
Conduit pump (PTO Slurry Pump) — a passive pump trailer that lets two pipe chains transfer through it.
Animated couplers and valves — clamp handles close on connect, valve wheels rotate on open.
Coloured pipes — pick from a palette per pipe segment, stored per save.
Multi-fill-type support — works with LIQUIDMANURE and DIGESTATE; transfers automatically pick whichever fill type is actually present.
Pumps & pressure

Pump types — vacuum (stored ±bar pressure model with a gauge), HVP high-volume pump, conduit pump station, and openTop passive vessels (e.g. nurse tanks).
Pressure model — vacuum tankers build, hold, taper and purge a stored charge that drives fill and discharge; spread behaviour scales with pressure rather than a simple on/off.
PTO shear bolt (opt-in) — wears and snaps under load while turning with the PTO engaged; walk-up hold-to-repair.
Slurry that behaves like slurry

Thickness / dry matter — slurry thickens as dry matter concentrates; thickness affects flow and spread.
Crust & blockages — an unmixed store crusts over the season; crusted, lumpy slurry can block spreader outlets and the macerator. Mixing clears the risk; adding water dilutes thick slurry.
Agitation — a manager-driven agitator works on any registered vehicle with an agitator tip node, no specialization required.
Water intake — fill arms can draw water straight from map lakes and ponds wherever the map provides SPS water planes.
Spreading

Dribble bars & band spreaders — per-outlet blockage modelling, distributor macerator, and a spreader HUD.
Fertiliser / herbicide sprayers — load liquid fertiliser or herbicide through the same coupler-and-pipe system via a dedicated sprayer integration, operated from a single walk-up pump control. No pressure model on sprayers — flow is a flat rate.

Server
Consoles
Changelog
8
  • -Newly added

    pressure and vacuum: Vacuum tankers maintain their vacuum, and the liquid flow follows it; suction operations via high-performance pump lines, back pressure during application, and the suction of slurry from a pit using a free hose or pipe end.

    Pressure gauges on the Supercis 800 and Kaweco Profi 2 models.

    Chemical mixing and cleaning: Concentrates are mixed with water in the sprayer; the concentration is maintained throughout the entire system (tanks, lines) until application in the field. A multi-stage cleaning process for soiled sprayers and a portable cleaning station are also available.

    New SPS vehicles: MKS 8 Dual Tank, 550 Water/Chem Bowser, Supercis 800, Kotte FRC 65, Amazone UX5201 Super.
    Water and suction baskets: A hose or pipe end submerged in a lake, river, pond, or waterway will only draw water through a suitable basket (small baskets for water/milk, large ones for slurry). These baskets can be carried on the vehicle using the designated holder.

    Leakage and contamination from lines: Open hose or pipe ends lying on the ground can leak fluid and form puddles.
    Uniform standards for reach and coupling radius for all connections.

    Settings menu: All PLC options are centrally located in one place.

    New manual: SPS_README_08_New_in_1.0.2.0.md.

    Fixed bugs:
    -The spray pattern on the cleaning device (washout boom) is now displayed correctly even when using "Soil & Fertilizer" chemicals.
    -"Soil & Fertilizer" IBC containers can once again be connected to water lines and spray hoses.
    -It is now possible again to pick up a suction strainer or a stowed hose at the connection point of the MKS 8.
    -Couplings on tank openings can also be used in physical pipe mode.
    -The handle on the cleaning station now correctly follows the valve, even when no hose is connected.

  • Corrections to the physical hose system for multiplayer mode (reported and retested by server players); the invisible hoses of the original hose system have been repaired; fertilizer/pesticides can now be routed through the water hose; there have also been revisions to the Borger 125 Separator.

    No configuration changes are required. Existing save games can be used unchanged.

    New
    fertilizer/plant protection product via water hose (physical hose system): The 80 mm water hose can now be connected to field sprayers, fertilizer/plant protection product silos, IBC containers, and purchasing stations. The buttons on the respective sprayer are used for this: "B" starts or stops the flow, "Y" switches between "loading" and "unloading". The cover must be opened beforehand (button "X"). The milk hose remains exclusively for milk.
    Borger 125 Separator: Information box with details on separated slurry (in kg/t), source, return flow, status, inflow rate, and solids content; real-time display on the control panel; solids visibly fall from the discharge chute; during use, soiling, wear, and moss growth occur; a wrench symbol appears on the switch.
    Any crust that forms dissolves when fresh slurry is pumped into the storage tank.
    The tower mixer is now available in the shop.
    "Clean" Log: Messages about hose connections now only appear when "spsDebug Info" is enabled.
    Fixed Bugs
    Multiplayer (Dedicated Server)
    : Manually picking up items by teammates did not work or resulted in the item being immediately dropped again.
    Hoses could only be grabbed at their female connector; "female/female" or "male/male" connections could not be picked up.
    Dropped hoses remained suspended in mid-air for teammates.
    Hoses that were already connected or stowed before a player joined appeared in a loose position.
    Physical Hose System:
    Tank trucks rotated uncontrollably if a hose was connected to the rear connector (e.g., Kotte TSA).
    No prompt to disconnect/disconnect appeared at a connected hose end.
    After reloading a save, connected hoses would detach, and a "stretched" hose would remain visible at the connector.
    A laid-out hose would disappear with a slight camera movement.
    It is no longer possible to connect a hose to both ports of the same machine.
    Original hose system:
    The automatic hose connection between two ports was not graphically displayed in version 1.0.1.8. The connection functioned, but was not visually apparent. For hoses used with sprayers, water, or milk that are stored at a length of more than 4 meters, the connection prompt now only appears when you are within range – so park closer to ensure the hose remains connected.
    Separator
    "Source empty" when the storage is full: fixed.
    Note
    On dedicated servers, the piping mode prompt does not appear at startup. An administrator can configure the physical piping in the PLC settings instead.

  • Description:
    Physical hoses, PLC docking station, PLC tower mixer, and numerous troubleshooting tasks.

    Newly added

    Physical hoses: Hoses can be purchased, carried, connected, and manually connected to each other (as an alternative to permanently installed lines). A dedicated shop page is available for each hose type: slurry/water/milk, 4 m or 6 m lengths, various connectors, and colors.
    To release stuck hoses (left Alt key + F while holding a hose): The hose can be moved through vehicles until released.
    Hose holders are available on tank trucks and the SPS docking station (mobile connection point).
    SPS tower mixer: A slurry lagoon agitator with an integrated pump for filling tank trucks.
    Flow indicators for pumps (PTO pump, tower mixer) include an indication of the reasons for pump stoppages; the flow rate is also displayed in the tank truck's HUD.
    Water and milk can be transported via hoses (connections with valves, gravity flow, transfer between tank trucks); support is provided for the central cow barn (SPS) as well as for fertilizer/herbicide silos.
    Hoses, docking station, PTO pump, and tower mixer are subject to dirt and wear; they can be cleaned with a pressure washer.
    Custom waterways can be drawn in the build menu.
    Bug fixes

    Multiplayer: Synchronization of valves, pumps, and connections; joining players receive the correct status; PLC settings can only be changed by an administrator; other farms cannot operate your equipment.
    Shear bolt status is saved; the floating layer in slurry lagoons is now synchronized per lagoon; Gea/Vector cow barns use their own configuration; hose holder added for the Farmtech SuperCis 800.
    Shop: "Slurry Technology" category, "PLC Slurry Set," cameras, and hose previews.
    Changes

    More organized log (routine messages moved to the "Info" debug channel), download size reduced by approximately 50 MB, lower processing load per frame.

  • Alle wijzigingen sinds V1.0.1.6. Geen wijzigingen aan het configuratieschema; opgeslagen spellen blijven onaangetast.

    Opgelost:
    De achterste klep opent niet langer bij tankwagens met `<turnedAnimation>` wanneer de pomp wordt ingeschakeld.
    Probleem met Abbey-tankwagens: met de PLC geïnstalleerd opende de achterste klep wanneer de pomp startte.
    Oorzaak: het XML-bestand van de tankwagen bevat een standaardinstructie `<turnOnVehicle><turnedAnimation name="..."/>`
    (de mechaniek van het basisspel: «De klep opent wanneer de tankwagen wordt ingeschakeld»).

    Omdat de PLC-pompbesturing ook de standaard inschakelreeks activeert, werd dezelfde animatie afgespeeld telkens wanneer de pomp startte of stopte.
    De PLC schakelt nu bij registratie een `<turnedAnimation>` (of een herhalende `<turnedOnAnimation>`) uit die verwijst naar een PLC-specifieke animatie (`spreaderValveAnimation` / `directionAnimation`); dit wordt slechts één keer gelogd – net zoals dat al het geval was bij een `movingTool` of `<foldable>` die dezelfde animatie bestuurt.
    Modmakers kunnen de standaardregel behouden: zonder PLC werkt deze zoals bedoeld; met PLC wordt de klep uitsluitend door de PLC bestuurd.

    Geblokkeerde uitlaten worden nu als zodanig weergegeven in de HUD van het verdeelstuk.
    Als een uitlaatsectie of de versnipperaar geblokkeerd is, voegt het bedieningspaneel naast de rode cellen een regel toe met de melding «Geblokkeerd - Vrijmaken bij de uitlaat (pomp uit, klep gesloten).»
    Het is nu duidelijk dat een blokkade bij de uitlaat te voet moet worden verholpen – bijvullen lost dit niet op, en een speler die deelneemt ontvangt de huidige blokkadestatus van de server.
    Gelokaliseerd in alle zes talen.

    De kans op blokkades veroorzaakt door vreemde voorwerpen is verminderd.
    De willekeurige kans op een blokkade met volledig schone mest (standaardwaarde voor `baseChance`) was 0,0015 per interval van 6 seconden – dit komt overeen met een kans van ongeveer 59 % op een blokkade per uur toepassing.
    De standaardwaarde is nu 0,0004 (≈5% per lading, ≈21% per uur).

    Blokkades veroorzaakt door korstvorming blijven ongewijzigd; een voertuigspecifieke `baseChance` voor `<blockageNodes>` blijft voorrang hebben op de standaardwaarde.
    BGA 250-configuratie aangepast aan de releaseversie:

    De planET BGA 250 wordt – net als in versie 1.0.1.6 – uitsluitend geleverd met een koppeling (zonder PLC-lagunegeheugen), waarbij het ontbreken van het geheugen expliciet in de configuratie is vastgelegd.
    Er zijn geen gedragswijzigingen ten opzichte van versie 1.0.1.6.

  • Version 1.0.1.1
    FS25_SlurryPipeSystem - Detailed changelog

    Period: 25th – 31st July 2026 · V1.0.0.10 → 1.0.1.1

    Each entry describes the problem, the cause, and the change made. Unless otherwise stated,
    The line information refers to version V1.0.1.1.

    For more detailed information, please visit the GitHub page.

    Version 1.0.0.10
    FS25 liquid manure pipe system (latest version) – from Willbobber.
    (V1.0.0.10 5e60b27).

  • Architecture

    SlurryPipeManager.lua (12,065 lines) split into a core file plus eight domain
    modules (SPSM_Chains, SPSM_Couplers, SPSM_Flow, SPSM_Pressure,
    SPSM_Consistency, SPSM_Spreader, SPSM_Sprayers, SPSM_IBC). Pure relocation,
    mechanically verified byte-identical to V1.0.0.8.
    Scripts folder reorganised into domain folders (debug/, chains/, couplers/,
    shearBolt/, blockage/, hud/, events/, agitators/, util/, water/,
    herbFertSprayer/, manager/, overrides/, settings/).
    New central debug registry (scripts/debug/SPSDebugConfig.lua): one named
    on/off channel per file, runtime-switchable via the spsDebug console
    command. All channels ship OFF.

    Performance (dedicated servers)

    Vehicle config lookups were loading and parsing vehicle XML from disk on
    every call, from per-tick trigger hooks and per-frame discharge gates — the
    reported ~45 km/h speed caps and steering lag on busy servers. Both finders
    are now cached per configFileName (negatives included). One disk read per
    vehicle model per session.

    Multiplayer fixes

    Placeable-side hose disconnects are now owner-keyed (the event carries the
    placeable), so every machine resolves the exact coupling — fixes "friend
    detaches, still attached on my end until he drives off".
    Selling a placeable now broadcasts authoritative disconnects for every live
    bond before teardown, and duplicate placeable registration (the stale
    "ghost pipe" generation on guests) is guarded out.
    New placeable detach-handler registry: chains anchored or bonded to a sold
    placeable (animal pens, docking stations) are now fully removed with correct
    coupler close animations on every machine; sprayer-pipe disconnects on sell
    are broadcast; pending queues referencing the sold placeable are purged.
    Future placeables (separator etc.) plug into the same registry.
    Disconnect events now log an [SPS MP RX] line on receivers.

    Sprayer store system (new)

    SPS xml now controls a store's fill types: coupler-declared types are seeded
    into the placeable's Storage at load — no map/base xml edits needed
    (storageFillTypeControl="store" opts a modder store out).
    Per-coupler capacity="X": same-type couplers sum into that type's storage
    capacity; without it the store's own capacity applies.
    Dynamic tank compartments: fillTypes="ANY" (or a category/name list) plus
    capacity makes a coupler one physical tank — it locks to the first liquid
    that flows through it and unlocks only when drained empty, then the type
    vanishes from the info panel. Works with basegame and script-mod liquids
    (SoilFertilizer etc.). Locked compartments persist in the savegame and sync
    to clients (event + join dump).
    ANY couplers pre-seed the base "sprayer" category so basegame liquids always
    show on the store display; aggregate levels self-heal from older saves.
    Connecting picks the coupler nearest the PLAYER when several are in reach —
    walk to the tank you want.
    Sprayer placeable couplings accept node="..." (i3dMappings, matching the
    slurry placeable schema) as well as mountNodeName.

    Robustness

    Map mod folders can be renamed freely: bundled Witcombe config match paths
    no longer include the folder name, and both placeable register paths bail
    cleanly if a path-matched config finds none of its nodes (wrong placeable).
    Water manifest matching is case-insensitive, supports title alternatives
    (titles="A;B") and opt-in substring matching (titleContains=); player
    folder renames never affected it.

  • Version 1.0.0.8
    Fixed problems with multiplayer, pipes and valves, and synchronization issues.
    Some other adjustments.

    V1.0.0.7

    Added support for FS25 Soil Fertilizer mod.
    Added fixed location for IBC placement when emptying sprayers.
    Fixed add IBC key bind when sprayer is empty.

    V1.0.0.6

    Multiplayer mode added to SPS.
    IBC support added for syringes.
    Several other bug fixes.

    V1.0.0.5

    Changes made for bug fixes and updates.

Credits
  • Willbobber
Comments
17