Reinke Irrigation System V2

Reinke Linear Irrigation System Pack
Bring realistic linear irrigation to your flatlands! This pack offers realistically priced Reinke linear move irrigation systems—smaller models are budget-friendly, while the larger setups scale accordingly.

Available Widths
You can place the following sizes under the placeables menu:

37 meters (Affordable entry model)

75 meters

115 meters

223 meters

Placement & Terrain Requirements
Flat and Clear Land: Reinke linear systems are designed for flat, obstacle-free terrain. Do not use them on hilly or sloped ground.

Clear Path: Ensure there are no trees, utility poles, or obstacles in the field that the machine could collide with during operation.

Placement Delay: When placing the main 228-meter pipe and hydrant, expect a short delay of about 6 seconds for it to spawn.
(Note: The game may log a warning for these components, but this is entirely normal and does not affect gameplay—everything is 100% functional!)

Pipes & Extensions
If the default 228-meter pipe and hydrant setup is not long enough, you can extend the length using 50-meter pipe add-ons.

Towing & Connection: You can tow the pipes easily using a tractor via the 3-point hitch. For the best experience handling and connecting pipes, we recommend using the Easy Development Control mod with "Super Strength" turned on.

Attaching: Connect the pipes to the Reinke simply by pressing the Q key.

Quick Removal Tool: A special pipe wrench tool is included. By clicking on a single pipe piece with it, you can instantly delete and clean up the entire connected pipe network for maximum convenience.

Operation & Controls Guide
Water Valve: Open the water valve using the Interactive Control mod before entering the Reinke.

Vehicle Switch: Press the G key to switch into vehicle control mode so Interactive Control inputs take effect.

Engine Setting: Make sure Automatic Motor Start is set to No (disabled).

Power Up: Turn on the Reinke using the Key icon.

Interactive Control Panel: Via the panel, you can now activate:

Spraying / Irrigation

Beacon lights

Engine

GPS-like alignment corrector (This aligns the machine straight based on your set angle once cruise control is engaged).

Speed Settings:

Stage 1: 1 km/h

Stage 2: 2 km/h

Stopping Procedure (Important!)
Recommended Method: When the Reinke finishes its run, turn off only the engine first. This instantly engages the brakes and holds it securely in place.

Alternative (Not Recommended): If you turn off the cruise control/GPS before the engine, the machine will roll backward for a short distance. Always shut down the engine first to park it properly!

Pumps and hoses compatibility has been removed; it now includes only my own piping system and the Reinke irrigation unit equipped with a control panel, plus a 228-meter pipe, a 50-meter pipe extension, and a pipe tool that allows you to delete pipes with a single click.

Enjoy realistic and efficient crop watering on your flat fields!