Search results for headline A/B test crypto site💯Login-[qfscoin.com]

Headland management allows functions to be combined in the vehicle and activated together at the touch of a button to simplify turning manoeuvres during field work. All functions can be activated and deactivated individually for each vehicle via a GUI in order to achieve ideal adaptation to the work being carried out. Headland management must be added to the respective vehicle as a one-off configuration in the shop or in the workshop before use. The cost for this is 3000$. It can be activated and deactivated in the vehicle. Various buttons can also be configured for activation and deactivation. Functions included: - Reduce speed (cruise control) and raise again, reactivate cruise control if it was previously active - Raise lowered implements and lower them again, optionally raise front implements before raising rear implements - Turn the plough, single-stage or two-stage (via the centre position) - Raise and change track markers - Change sides with crab steering activated - Switch off PTO shaft(s) and hydraulics and switch on again - Warning tone when headland mode is activated - On/off switch: The headland management can be switched on and off. This prevents accidental activation during transfer to the work site and improves road safety. - Automatic headland management: Automatic activation of headland mode when the headland is reached. Optional return to field mode after completing the 180° turn. - Option to temporarily deactivate headland automatic headland by pressing a button - Contour guidance: Automatic control along the field boundary or along the cultivated area - The configuration is saved and restored for each device type With existing EnhancedVehicle (FS25_EnhancedVehicle): - Deactivate and reactivate GPS lane guidance, optionally trigger the turning function - Release and reset active differential locks - Use of EV headland detection if it has been activated Pre-assigned key combinations (can be changed): - Switch headland management on/off: (left) Shift + (left) Alt + X - Switch operating mode (field mode / headland mode): (left) Shift + X - Call up GUI for configuration: (left) Shift + (left) Ctrl + X Other prepared key combinations (not pre-assigned) - Temporarily deactivating/reactivating (toggling) the headland automatic function - Temporarily deactivating the automatic headland automatic function - Reactivating the automatic automatic - Activation of the field mode - Activation of the headland mode GitHub link: https://github.com/jason0611/FS25_HeadlandManagement Further ideas or requests are welcome there

The Plana Agrícola Bandeirante is a versatile equipment coupled to wheeled tractors, offering solutions for the loading and unloading of products, land cleaning and handling of the most diverse loads. The front loader has Pantographic tie rods developed in a multiple fold system, providing greater mechanical resistance to the system. Structure with a single transverse tube, providing a greater field of vision for the operator. Exclusive Profile of the structure in Hexagonal format, providing greater resistance to the structure. Level display, enabling faster leveling. Content: Bandeirante Hexline 1050: Required enginepower: 190 HP Price: 5400 $ Bale fork 1050: - Price: 600 $ Silage fork 1050: - Price: 2100 $ - Capacity: 810 L Log Fork with Grapple 1050: - Price: 800 $ Pallet fork 1050: - Price: 800 $ Wrapped bale handler 1050: - Price: 1700 $ Levelling rake 1050: - Price: 600 $ - Working width: 2.6 m Planer 1050: - Price: 600 $ - Working width: 2.6 m Shovel 1050: - Price: 800 $ - Capacity: 1000 L BigBag lifter 1050: - Price: 3000

Headland management for tractors, field sprayers, mowers and harvesters. With headland management, functions of vehicles can be combined and activated together at the touch of a button to simplify turning manoeuvres when working in the field. All functions can be activated and deactivated individually for each vehicle via a GUI to achieve ideal adaptation to the work being carried out. The headland management system must be added once to the respective vehicle in the shop or in the workshop as a configuration before it can be used. The cost for this is 3000,-. It can be activated and deactivated in the vehicle with Shift-X. Alternatively, different buttons for activation and deactivation can be configured. The GUI is called up by default with Shift+Ctrl+X. New: Headland Management can now perform contour guidance, i.e. automatic steering along the field boundary or the worked area. Important: When contour guidance is activated, a working speed of 10 km/h should not be exceeded, otherwise the steering may oscillate strongly. In this case, simply reduce the speed briefly. Included functions: - Reduce speed (cruise control) and raise again, reactivate cruise control if previously active - Raise lowered implements and lower them again - Turn plough, single-stage or two-stage (via centre position) - Raise and change ridge markers - Control crab steering - Disengage and re-engage power take-off(s) and hydraulics - Beep when headland management is activated - On/Off switch: Headland Management can be switched on and off. This prevents accidental triggering during transfer to the target field and improves road safety. - Headland automatic: Activate headland mode automatically when headland is reached. Optional return to field mode after completing the 180° turn. - Contour guidance: Automatic control along the field boundary or along the machined area If VCA Mod (FS22_VehicleControlAddon) is present: - Deactivate and reactivate GPS track guidance - Disengage and re-engage active differential locks - Trigger VCA's turn function, switch turn direction optionally If Guidance Steering (FS22_guidanceSteering) is present: - Deactivate and reactivate GPS guidance If SpeedControl (FS22_SpeedControl is present: - Speed adjustment also possible via change of cruise control level If EnhancedVehicle (FS22_EnhancedVehicle) is present: - Deactivate and reactivate GPS guidance, optionally with triggering the automatic turn function - Release and reset active differential locks - Use EV's headland detection if activated Further ideas or wishes are welcome at https://github.com/jason0611/FS22_HeadlandManagement

Claas cutting unit with a large working width. With the header, you can get to the field directly without an additional header trailer, by coupling it to the thresher or to another vehicle. The mod is free of log errors. There are no mistakes and the header trailer runs perfectly and should not be missing on any farm with Claas Drescher. I recommend the Claas Trion thresher, of course you can also use any other one. Have fun working with this cutting unit!

Headland management for tractors, field sprayers, mowers and harvesters. With headland management, functions of vehicles can be combined and activated together at the touch of a button to simplify turning manoeuvres when working in the field. All functions can be activated and deactivated individually for each vehicle via a GUI to achieve ideal adaptation to the work being carried out. The headland management system must be added once to the respective vehicle in the shop or in the workshop as a configuration before it can be used. The cost for this is 3000,-. It can be activated and deactivated in the vehicle with Shift-X. Alternatively, different buttons for activation and deactivation can be configured. The GUI is called up by default with Shift+Ctrl+X. Included functions: - Reduce speed (cruise control) and raise again. - Raise lowered implements and lower them again - Turn plough, single-stage or two-stage (via centre position) - Raise and change ridge markers - Disengage and re-engage power take-off(s) and hydraulics - Beep when headland management is activated Additionally, if VCA Mod (FS19_VehicleControlAddon) is present: - Deactivate and reactivate GPS track guidance - Disengage and re-engage active differential locks Additionally, if Guidance Steering Mod (FS19_guidanceSteering) is available: - Deactivate and reactivate GPS guidance Additionally for existing SpeedControl Mod (FS19_zzzSpeedControl): - Speed adjustment also possible by changing the cruise control level Ideas for subsequent versions: - Sequence of work steps adjustable - Selectable time interval between individual work steps Further ideas or wishes are welcome at https://github.com/jason0611/FS19_HeadlandManagement

The Plana Agrícola Bandeirante is versatile equipment coupled to wheeled tractors, offering solutions for loading and unloading products, land cleaning and handling of the most diverse loads. This adapts to the most diverse tractors Pantographic tie rods developed in a multiple fold system, providing greater mechanical resistance to the system. Structure with a single transverse tube, providing a greater field of vision for the operator. Exclusive Profile of the structure in Hexagonal format, providing greater resistance to the structure. Level display, enabling faster leveling. Scout Hexline 1050. -Cavalry 190CV -Price 5400$ Hay fork. -Price 600$ Silage fork. -Price 2100$ - 810 L capacity Log fork with claw. -Price 800$ Pallet Truck. -Price 800$ Roll fork. -Price 1700$ Ripper Rake. -Price 600$ -working width 2.6 Big Bag Winch. -Price 3000$ planer. -Price 600$ -Working width 2.6 Shell. -Price 800$ -800L capacity Big Bag Seeds. -Price 1200 -Capacity 2000L