Zoekresultaten voor headline A/B test crypto site💯Login-[qfscoin.com]

Het management van het landland maakt het mogelijk om functies in het voertuig te combineren en samen met een druk op de knop te worden geactiveerd om het draaien van manoeuvres tijdens veldwerk te vereenvoudigen. Alle functies kunnen voor elk voertuig via een GUI afzonderlijk worden geactiveerd en gedeactiveerd om ideale aanpassing aan het werk te bereiken. Het management van het land van het land moet worden toegevoegd aan het respectieve voertuig als een eenmalige configuratie in de winkel of in de workshop voor gebruik. De kosten hiervoor zijn 3000 $. Het kan worden geactiveerd en gedeactiveerd in het voertuig. Verschillende knoppen kunnen ook worden geconfigureerd voor activering en deactivering. Functies inbegrepen: - Verminder de snelheid (cruise control) en haal opnieuw op, reactiveer cruise control als het voorheen actief was - Verlaagde werktuigen verhogen en laat ze opnieuw zakken, verhoog optioneel de voorkant van de voorkant voordat u de achterste werktuigen verhoogt -Draai de ploeg, enkele fase of tweetraps (via de middelste positie) - Verhogen en wijzigen trackmarkeringen - Verander van kant met krabbesturing geactiveerd - Schakel aftakasas (s) en hydraulica uit en schakel opnieuw in - Waarschuwingstoon wanneer de koptaalmodus wordt geactiveerd - AAN/UIT SCHAKELIJK: het landtoonbeheer kan worden ingeschakeld. Dit voorkomt accidentele activering tijdens de overdracht naar de werkplaats en verbetert de verkeersveiligheid. - Automatisch Headland Management: Automatische activering van de landtongmodus wanneer de landtong wordt bereikt. Optionele terugkeer naar veldmodus na het voltooien van de 180 ° beurt. - Optie om de automatische landtong van de landtong tijdelijk te deactiveren door op een knop te drukken - Contourbegeleiding: automatische controle langs de veldgrens of langs het gecultiveerde gebied - De configuratie is opgeslagen en gerestaureerd voor elk apparaattype Met bestaande EnhancedVeHicle (FS25_EnhancedVeHicle): - deactiveer en reactiveren GPS -rijstrookbegeleiding, actioneel actioneel de draaifunctie activeren - Laat actieve differentiële sloten los en reset - Gebruik van EV -headlanddetectie als het is geactiveerd Vooraf toegewezen sleutelcombinaties (kunnen worden gewijzigd): - Schakel het management van het kopland aan/uit: (links) verschuiving + (links) Alt + x - Schakel de bedrijfsmodus (veldmodus / koplandmodus): (links) Shift + X - roep GUI op voor configuratie: (links) Shift + (links) Ctrl + x Andere voorbereide belangrijke combinaties (niet vooraf toegewezen) - Tijdelijk deactiveren/opnieuw activeren (schakelen) de automatische functie van de landtong (schakelen) - Tijdelijk de activeren van de automatische automatische Headland -functie - Reactivering van de automatische automatische - Activering van de veldmodus - Activering van de Headland -modus GitHub Link: https://github.com/jason0611/fs25_headlandmanagement Verdere ideeën of verzoeken zijn daar welkom

The Plana Agrícola Bandeirante is a versatile equipment coupled to wheeled tractors, offering solutions for the loading and unloading of products, land cleaning and handling of the most diverse loads. The front loader has Pantographic tie rods developed in a multiple fold system, providing greater mechanical resistance to the system. Structure with a single transverse tube, providing a greater field of vision for the operator. Exclusive Profile of the structure in Hexagonal format, providing greater resistance to the structure. Level display, enabling faster leveling. Content: Bandeirante Hexline 1050: Required enginepower: 190 HP Price: 5400 $ Bale fork 1050: - Price: 600 $ Silage fork 1050: - Price: 2100 $ - Capacity: 810 L Log Fork with Grapple 1050: - Price: 800 $ Pallet fork 1050: - Price: 800 $ Wrapped bale handler 1050: - Price: 1700 $ Levelling rake 1050: - Price: 600 $ - Working width: 2.6 m Planer 1050: - Price: 600 $ - Working width: 2.6 m Shovel 1050: - Price: 800 $ - Capacity: 1000 L BigBag lifter 1050: - Price: 3000

Headland management for tractors, field sprayers, mowers and harvesters. With headland management, functions of vehicles can be combined and activated together at the touch of a button to simplify turning manoeuvres when working in the field. All functions can be activated and deactivated individually for each vehicle via a GUI to achieve ideal adaptation to the work being carried out. The headland management system must be added once to the respective vehicle in the shop or in the workshop as a configuration before it can be used. The cost for this is 3000,-. It can be activated and deactivated in the vehicle with Shift-X. Alternatively, different buttons for activation and deactivation can be configured. The GUI is called up by default with Shift+Ctrl+X. New: Headland Management can now perform contour guidance, i.e. automatic steering along the field boundary or the worked area. Important: When contour guidance is activated, a working speed of 10 km/h should not be exceeded, otherwise the steering may oscillate strongly. In this case, simply reduce the speed briefly. Included functions: - Reduce speed (cruise control) and raise again, reactivate cruise control if previously active - Raise lowered implements and lower them again - Turn plough, single-stage or two-stage (via centre position) - Raise and change ridge markers - Control crab steering - Disengage and re-engage power take-off(s) and hydraulics - Beep when headland management is activated - On/Off switch: Headland Management can be switched on and off. This prevents accidental triggering during transfer to the target field and improves road safety. - Headland automatic: Activate headland mode automatically when headland is reached. Optional return to field mode after completing the 180° turn. - Contour guidance: Automatic control along the field boundary or along the machined area If VCA Mod (FS22_VehicleControlAddon) is present: - Deactivate and reactivate GPS track guidance - Disengage and re-engage active differential locks - Trigger VCA's turn function, switch turn direction optionally If Guidance Steering (FS22_guidanceSteering) is present: - Deactivate and reactivate GPS guidance If SpeedControl (FS22_SpeedControl is present: - Speed adjustment also possible via change of cruise control level If EnhancedVehicle (FS22_EnhancedVehicle) is present: - Deactivate and reactivate GPS guidance, optionally with triggering the automatic turn function - Release and reset active differential locks - Use EV's headland detection if activated Further ideas or wishes are welcome at https://github.com/jason0611/FS22_HeadlandManagement

Claas cutting unit with a large working width. With the header, you can get to the field directly without an additional header trailer, by coupling it to the thresher or to another vehicle. The mod is free of log errors. There are no mistakes and the header trailer runs perfectly and should not be missing on any farm with Claas Drescher. I recommend the Claas Trion thresher, of course you can also use any other one. Have fun working with this cutting unit!

Headland management for tractors, field sprayers, mowers and harvesters. With headland management, functions of vehicles can be combined and activated together at the touch of a button to simplify turning manoeuvres when working in the field. All functions can be activated and deactivated individually for each vehicle via a GUI to achieve ideal adaptation to the work being carried out. The headland management system must be added once to the respective vehicle in the shop or in the workshop as a configuration before it can be used. The cost for this is 3000,-. It can be activated and deactivated in the vehicle with Shift-X. Alternatively, different buttons for activation and deactivation can be configured. The GUI is called up by default with Shift+Ctrl+X. Included functions: - Reduce speed (cruise control) and raise again. - Raise lowered implements and lower them again - Turn plough, single-stage or two-stage (via centre position) - Raise and change ridge markers - Disengage and re-engage power take-off(s) and hydraulics - Beep when headland management is activated Additionally, if VCA Mod (FS19_VehicleControlAddon) is present: - Deactivate and reactivate GPS track guidance - Disengage and re-engage active differential locks Additionally, if Guidance Steering Mod (FS19_guidanceSteering) is available: - Deactivate and reactivate GPS guidance Additionally for existing SpeedControl Mod (FS19_zzzSpeedControl): - Speed adjustment also possible by changing the cruise control level Ideas for subsequent versions: - Sequence of work steps adjustable - Selectable time interval between individual work steps Further ideas or wishes are welcome at https://github.com/jason0611/FS19_HeadlandManagement

The Plana Agrícola Bandeirante is versatile equipment coupled to wheeled tractors, offering solutions for loading and unloading products, land cleaning and handling of the most diverse loads. This adapts to the most diverse tractors Pantographic tie rods developed in a multiple fold system, providing greater mechanical resistance to the system. Structure with a single transverse tube, providing a greater field of vision for the operator. Exclusive Profile of the structure in Hexagonal format, providing greater resistance to the structure. Level display, enabling faster leveling. Scout Hexline 1050. -Cavalry 190CV -Price 5400$ Hay fork. -Price 600$ Silage fork. -Price 2100$ - 810 L capacity Log fork with claw. -Price 800$ Pallet Truck. -Price 800$ Roll fork. -Price 1700$ Ripper Rake. -Price 600$ -working width 2.6 Big Bag Winch. -Price 3000$ planer. -Price 600$ -Working width 2.6 Shell. -Price 800$ -800L capacity Big Bag Seeds. -Price 1200 -Capacity 2000L